吉林附近有没有服务

 

Service hotline:
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine
 
 

Latest cases

What is the function of double axis Shredder?

Features of double shaft shredder: compared with other crushers, the features of the shredder are low speed of cutter shaft, low noise and low energy consumption. The suitable materials of the double axis shredder are as follows: 1. Various hollow containers: plastic beverage cans, plastic barrels, iron drums, packing boxes, etc

Click to see the details

How to save production cost of users by shredder

High manganese steel lining plate is used for shredder equipment lining plate, which greatly improves wear resistance and service life is 6-8 months, which greatly saves production cost of users. After being processed and crushed by shredder, these scrap iron sheets can be sent to steelmaking plant for smelting again to make new steel

Click to see the details

Current position: home page  >  News Center

Tiny raw materials break easily and stick to the wood shredder

In Wood shredder In the working process, the composition of the material, the small fracture is easy to stick inside, which increases the difficulty of crushing, so the more finely broken, the greater the impact on the shredder crushing. This means that the finer the material contained in the material before crushing, the more broken the shredder. If the material contains too many small damages, the shredder should also be screened before crushing; the better the wear resistance of the crushing part (hammer head, jaw plate) of the shredder, the greater the crushing capacity of the shredder, and vice versa.

About the detection of shredder equipment reversal before use: when the power is turned on, use idle operation in advance to check whether the steering is normal. If it is not normal, it indicates that there is a problem with the positive and negative sides of the power supply. Check the power connection in time to ensure normal steering; secondly, when the shredder is changing tools, the blade should be extended between two and four centimeters, because if there is too much, it will touch the equipment, which will eventually lead to tool damage. The bolts should also be tightened. There should be no sign of loosening. Once the bolt is loose in use, the danger degree of the tool itself will be greatly increased;

The problem of crushing materials with stones or steel nails during use is very dangerous, because these hard materials are likely to be all parts of the shredder at high speed. Cause serious damage. The above content is my introduction to the safety monitoring link of shredder equipment before use.

About us
Company profile
corporate culture
contact us
News Center
Company news
Industry trends
technical knowledge
Product exhibition hall
Metal crusher
Shredder
Baler
Successful cases
Engineering cases
Service support
Sales network
Service system