吉林附近有没有服务

 

Service hotline:
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine
 
 

Latest cases

What is the function of double axis Shredder?

Features of double shaft shredder: compared with other crushers, the features of the shredder are low speed of cutter shaft, low noise and low energy consumption. The suitable materials of the double axis shredder are as follows: 1. Various hollow containers: plastic beverage cans, plastic barrels, iron drums, packing boxes, etc

Click to see the details

How to save production cost of shredder

High manganese steel lining plate is used for shredder equipment lining plate, which greatly improves wear resistance and service life is 6-8 months, which greatly saves production cost of users. After being processed and crushed by shredder, these scrap iron sheets can be sent to steelmaking plant for smelting again to make new steel

Click to see the details

Current location: home page  >  Shredder

Building formwork crusher

Building template crusher | template crusher | waste shell plate Crusher & middot; [machine specification]: 500 / 650 / 800 / 1000 / 1200
[feed size]: 50 & times; 10-120&

Product ordering hotline: eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Building formwork crusher | Template crusher | Waste shell plate crusher

·                                  Shredder | double shaft shredder | garbage shredder | wood shredder | plastic shredder | rubber tire shredder | woven bag shredder | shredder manufacturer

  Machine specification] :   500/650/800/1000/1200 type
  Feed size] :   fifty × ten one hundred and twenty × twenty a centimeter
  Crushing yield] one fifteen ton / hour
  Motor power] :   thirty-two 63kw
[conveyor power] : four 7.5kw
[equipment weight] :     3 fifteen ton
Crushing effect : Wood chips and blocks
[application scope] : Bark crushing processing plant, power plant, wood crushing and crushing processing base, plywood and other waste wood processing enterprises, processing width one point two Meter, thickness 1-30 Cm of wood and other leftovers

Effect drawing of template crusher


 Shredder | double shaft shredder | garbage shredder | wood shredder | plastic shredder | rubber tire shredder | woven bag shredder | shredder manufacturer


Application of template crusher

 

     The new type template crusher has always been our company's key research and development products. According to the market demand, the company has developed a new generation of special plate crushing equipment in the process of building formwork crushing. This equipment is aimed at the utilization of bark crushing processing plant, power plant, wood crushing and crushing processing base, plywood and other waste wood processing enterprises, with processing width one point two Meter, thickness 3-30 The whole machine has the linkage control of conveying, feeding, pressing plate and crushing. In addition, various types of wood processing equipment can be customized according to customer requirements.
Structural features

 

     The new type of template crusher is a new generation of special plate crushing developed by the company according to the market demand. It is mainly composed of working platform, feeding roller and conveyor, etc.; feeding conveying: placing the wood to be broken; feeding roller: controlling the feeding speed and keeping the plate material from sliding and not feeding; Spiral crushing roll: the welding cutter is uniformly distributed along the circumference of the roller to ensure the uniform stress of the crushing roller at all times in the circumferential direction; the plate crushing has the synchronization of feeding and crushing to realize the uniform crushing; the feeding pressure roller adopts the UCK Series of bearings with spring compression mechanism can be used for crushing of different plate thickness; feed pressure roller and crushing roller adopt different power systems, which are easy to control. Due to its reasonable design, compact structure, safety, durability and high production efficiency, after being popularized and used, the effect is good, the noise is small, the structure is simple, the layout is compact, the price is cheap, the work is stable, the energy consumption is small, the output is high, the crushing product quality is good, and the processing cost is low.
Performance characteristics

    one Meshing blade can completely crush materials;  
    2 Special blade with high hardness;  
    3 Strong structure, densely distributed stiffened plate, to ensure the strength of the box body;  
    4 Automatic button control, safe and convenient;  
    5 Safety label, safety label;  
    6 Can be equipped with conveyor belt feeding.  
After sales service of template crusher

 

Installation and debugging   (free)
        The main engine and motor are fixed on the same frame, mainly to strengthen its stability. During installation, the ground should be flat to ensure the corresponding linearity of the main wheel and motor wheel, and ensure that the transmission belt has appropriate tension travel. The installation of auxiliary equipment can be determined by the customer according to the site conditions and without any potential safety hazard and without affecting the normal operation.
The connection parts shall be filled with dense sealing gasket. The power circuit of the whole machine should be connected by professionals. Before starting the machine, the system should check whether the connection parts are loose, whether the bearings and other parts need lubrication are lubricated, and jog the machine to see whether the steering direction is consistent with the marked direction. After all the inspections are completed, the whole machine can be started slowly.   
one Before start-up, the installation of all parts of the machine should be strictly checked to see if it meets the requirements. Metal objects should not fall into the machine. First, use the manual belt to test run to see whether there is biting brake and rotating shell collision, so as to avoid accidents.   
two Start up sequence: start the main power supply first, and jog the machine several times until it starts normally.   
three When feeding, it should be kept even, and it is forbidden for metal block to enter into the blanking hole.   
four In the process of use, the motor load can not be overloaded and keep normal operation.
five Before the normal operation of the equipment, the equipment shall be operated without load for a period of time, and all components shall be inspected in detail. If there is any abnormality, it shall be repaired in time and unloaded again until the no-load operation is normal.
six The wear procedure of the blade and grinding plate should be checked frequently. If the wear of the blade grinding plate is found to be serious, it should be replaced in time.   
seven When shutting down, the main engine shall be shut down first, and then the main power supply shall be cut off. When the equipment is not in use, all parts of the equipment should be cleaned, and the bearing lubricating oil should be cleaned and replaced. The equipment should be covered with dust to avoid rain and sun exposure.

Customer case

  •  Video of light and thin material crusher production line Video of light and thin material crusher production line

    On the roller crusher, the crushed material will fall between the two rollers through the feeding port, and the finished material will fall down naturally. In case of hard or unbreakable materials, the roller of the roller crusher can automatically retreat by the action of hydraulic cylinder or spring to increase the roller clearance,

    Click to see the details

  •  Production site of scrap steel crusher Production site of scrap steel crusher

    1. It is suitable for crushing operations in mines, brick houses, open-air environment and other industrial and mining conditions. 2. Adjustment of discharge particle size. A wedge or gasket adjusting device is installed between the two rollers, and the top of the wedge device is equipped with an adjusting bolt. When the adjusting bolt pulls the wedge upward

    Click to see the details

  •  Live video of sheet metal crusher Live video of sheet metal crusher

    The roller crusher can be used for crushing high and medium hardness ores, rocks and refractories in mineral processing, chemical industry, cement, refractories, abrasives, building materials and other industrial sectors. Double roll crusher, especially in refractory and mining industries

    Click to see the details

  •  Video of metal crushing machine Video of metal crushing machine

    1. The crushing ratio is large; 2. The product particle size is uniform; 3. The structure is simple and the maintenance is convenient; 4. There are two kinds of coarse and fine crushing; 5. The maximum compressive strength of the crushed material is 320MPa. 6. Medium size crushing of various ores and bulk materials. 7. It is widely used in mines

    Click to see the details

About us
Company profile
corporate culture
contact us
News Center
Company news
Industry trends
technical knowledge
Product exhibition hall
Metal crusher
Shredder
Baler
Success stories
Engineering cases
Service support
Sales network
Service system