吉林附近有没有服务

 

Service hotline:
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine
 
 

Latest cases

What is the function of double axis Shredder?

Features of double shaft shredder: compared with other crushers, the features of the shredder are low speed of cutter shaft, low noise and low energy consumption. The suitable materials of the double axis shredder are as follows: 1. Various hollow containers: plastic beverage cans, plastic barrels, iron drums, packing boxes, etc

Click to see the details

How to save production cost of users by shredder

High manganese steel lining plate is used for shredder equipment lining plate, which greatly improves wear resistance and service life is 6-8 months, which greatly saves production cost of users. After being processed and crushed by shredder, these scrap iron sheets can be sent to steelmaking plant for smelting again to make new steel

Click to see the details

Current position: home page  >  News Center

Do not operate blindly in case of sudden power failure of metal shredder

   Metal shredder Through the feeding system, the material enters into the shredding box body, and the box is equipped with a shredder blade. After crushing, extruding and shearing of the blade, the small pieces of material are discharged from the lower part of the tearing case.

Due to the harsh working environment of metal shredder, there are often emergencies in production and use. In case of sudden power failure of metal shredder, we should keep calm and never blindly carry out maintenance.
In case of sudden shutdown accident, the power supply must be cut off immediately to avoid other accidents in operation and production.
Second, to see whether the discharge port is blocked, the operator must use it strictly in accordance with the instruction manual, and do not blindly feed materials into the shredder to avoid exceeding the bearing capacity of the machine. In case of material blockage, stop the machine in time to remove the blockage at the discharge port of the metal shredder to ensure smooth discharge.
3. Check the parts frequently: when the machine is in normal operation, it is necessary to check the machine parts frequently, such as the tightness of the V-belt, the wear of the bearing and its heating, the wear of the cutting tool, whether the circuit is aging or broken.
4. When the voltage is too low, the power supply should be cut off immediately: the power supply voltage of the working environment is too low, which makes the main engine not have enough power to crush when encountering large materials. Check whether the power supply is normal, and adjust the voltage in the workplace to make it meet the voltage requirements of the equipment.

About us
Company profile
corporate culture
contact us
News Center
Company news
Industry trends
technical knowledge
Product exhibition hall
Metal crusher
Shredder
Baler
Successful cases
Engineering cases
Service support
Sales network
Service system