Wood shredder
Wood shredder introduction: Wood shredder is designed to meet the domestic and foreign customers to produce wood flour products, which belongs to the wood flour preparation stage in the wood plastic production process. This machine is a set of more than ten years of experience in the production of shredder, the wood shredder after the material directly through
Product ordering hotline: eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine
Introduction to wood shredder:
Wood shredder It is specially designed to meet the needs of domestic and foreign customers to produce wood flour products, which belongs to the wood flour preparation stage in the wood plastic production process. This machine is based on more than ten years of experience in the production of shredder. The material shredded by the shredder is directly used after passing through the shredder. The particle diameter reaches 6-8mm, and it is stored by air. According to the characteristics of wood, a small power shredder is used to tear wood, and the size can be determined according to the mesh size.
Structural composition:
The new type of wood shredder produced by our factory is mainly composed of frame, shell, lining plate, rotating shaft, blade, cutter head, belt pulley, etc. it covers a small area, has reasonable and compact structure layout, low energy consumption, high efficiency and good molding of finished products. It is an ideal choice for wood crushing processing equipment!
Wood shredder has the characteristics of compact structure, small floor area and low noise. The whole operation is completed by electrical control cabinet, with high degree of automation. With wide applicability and high efficiency, it is an ideal equipment for customers to save labor costs and improve production efficiency and economic benefits.
Maintenance:
1. As a result of long-time operation, the bearing in the shaft should be filled with grease. If the machine runs for a long time, it should be added twice more. Otherwise, the bearing will be damaged easily and affect the normal operation.
2. After using the V-belt for a period of time, the tightness should be readjusted. Press the middle part of the belt with your finger and drop it by 6-10 mm.
Concrete mixing station is a kind of building material manufacturing equipment which mixes sand, lime, cinder and other raw materials to make concrete. Since it was put into use, it has been playing an important role in China's building materials industry.
Jiuda machinery introduces its main performance features as follows:
1. Widely used performance: the concrete mixing station is mainly divided into four parts: sand and gravel feeding, powder feeding, water and admixture feeding, transmission mixing and storage. The whole equipment is cast with integral steel structure. High quality H-beam not only has a beautiful appearance, but also enhances the overall structural strength of the concrete mixing station. The equipment is easy to install and has various forms, which can be used in various fields It can meet the needs of different projects
2. Good mixing performance: the double horizontal shaft forced mixing machine is widely used in the concrete mixing station, which can not only make the mixer strong, but also achieve good mixing effect for the concrete with dry hardness, plasticity, fluidity and various proportions, with even mixing and high mixing efficiency.
3. Good environmental protection function: the new concrete mixing station equipment has good environmental protection performance. During the operation of the machine, the powder operation is carried out in the full blocking system, and the powder tank adopts high-efficiency dust collector and other methods, which greatly reduces the pollution of dust to the environment. At the same time, the exhaust and discharge equipment of the pneumatic system of the concrete mixing station are all equipped with noise elimination devices The noise pollution is effectively reduced.
