吉林附近有没有服务

 

Service hotline:
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine
 
 

Latest cases

What is the function of double axis Shredder?

Features of double shaft shredder: compared with other crushers, the features of the shredder are low speed of cutter shaft, low noise and low energy consumption. The suitable materials of the double axis shredder are as follows: 1. Various hollow containers: plastic beverage cans, plastic barrels, iron drums, packing boxes, etc

Click to see the details

How to save production cost of users by shredder

High manganese steel lining plate is used for shredder equipment lining plate, which greatly improves wear resistance and service life is 6-8 months, which greatly saves production cost of users. After being processed and crushed by shredder, these scrap iron sheets can be sent to steelmaking plant for smelting again to make new steel

Click to see the details

Current location: home page  >  Shredder

Cement support block machine

A new type of cement supporting block machine, which is a combination of hydraulic pressure and vibration, takes river sand, stone, slag, shale, coal gangue, fly ash as the main raw materials, and adds a small amount of cement, which is pressed and shaped by the cushion block machine and can be naturally maintained

Product ordering hotline: eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

New cement support block machine The cushion block machine is a kind of cement cushion block machine combining hydraulic pressure and vibration. The cushion block machine takes river sand, stone, slag, shale, coal gangue, fly ash as the main raw materials, adds a small amount of cement, and is pressed and shaped by the cushion block machine, and can be used after natural maintenance. The cushion block machine is equipped with a secondary distribution device, which can not only produce various specifications of cushion block and wall brick, but also produce color pavement brick, road edge stone, tree pit stone, lawn brick, slope protection brick and other products. The cushion block machine is produced by German core technology, and the mould adopts advanced technology of high quality steel. After finishing, wire cutting, heat treatment and other processes, it is durable and in the leading position in the world. Due to the reasonable matching of pressure and vibration, the cushion block machine has beautiful products and good strength, which can be palletized out of the mold and save a lot of supporting plates. Due to the superior performance of the cushion block machine, it is well received by users and is the first choice in the construction industry.
Technical features:
Block forming machine frame: made of high strength steel and special welding process, it is extremely solid.
Guide column of cushion block machine: made of super special steel, with chrome plating on the surface, it has good torsion resistance and wear resistance.
Cushion block machine die head: machine, electricity, hydraulic synchronous drive, the same pallet product height error is very small, product consistency is good.
Cushion machine distributor: it adopts the sensing and hydraulic proportional driving technology, under the action of swing distribution car and arch breaking mechanism, it produces forced centrifugal discharge, and the distribution is fast and uniform, which is especially beneficial to cushion products with holes.
Cushion machine vibrator: driven by Electro-hydraulic Technology and multi-source vibration system, it can generate vertical synchronous vibration by hydraulic drive under computer control, with adjustable frequency and amplitude, realizing the working principle of low-frequency feeding and high-frequency molding, which can achieve good vibration effect for different raw materials.                    

Special palletizer for cushion block machine: the function of the palletizer is to automatically lift the formed cushion blocks one board by one, which is convenient for pushing and transporting and saves manpower. The self-developed palletizer works automatically without any operation. When each top needs height, it automatically transmits the signal to the rear, and has good coordinated operation performance.
Features: accurate positioning, fully automatic operation, saving you 50000 yuan per year.
Pad machine control system: fully automatic PLC computer control, human-machine interface, electrical appliances using Japanese Mitsubishi and other brands, the control program integrated 15 years of practical production experience, combined with international development trend, designed to meet the national conditions, to achieve no need for professionals, only simple training can be operated, powerful memory can be used for upgrading.

The main technical parameters are as follows:  

 

model

 

Qt3-15

 

Number of molding blocks

 

20 supports / 42 pieces - 70 stirrups / 56 pieces - round cushion blocks for protective layer / 150 pieces

 

Molding cycle

 

13-17/S

 

Design capacity

Cement support: 40000-70000 pieces / shift stirrup: 60000-90000 pieces / shift round cushion block: 140000-170000 pieces / shift

 

Vibration frequency

 

4500 times / min - 5100 times / min

 

Magnetic vibration force

 

~22KN

 

Vibrator power

 

Y132S1-2  N=6KW

 

Pallet size

 

680×535×10-30mm

 

Oil pump

 

Cb32: q = 40ml / R P = 10MPa

 

Top cylinder

 

80 × 300 rod diameter 40

 

Side cylinder

 

63 × 250 rod diameter 32

 

Rated pressure of hydraulic system

 

8mpa

 

Exciting force

 

22KN

 

Installed capacity

 

16kw

 

Main engine weight

 

4.8T

 

Dimensions

 

4000×3500×2300mm

Eight advantages
1. PLC intelligent control, random signal and vibration analysis system, computer interface operation, can achieve the best working effect of the machine.       
2. The structure is novel, the machine body is welded with super strong section steel, the equipment has remarkable performance, and the working performance is reliable, continuous operation is not a problem!       
3. Material storage and distribution device: the traditional molding machine materials are stored in the hopper. Affected by the aftershock, part of the concrete is liquefied in advance, prolonging the feeding time and increasing the feeding difficulty. Moreover, the strength error of the products is large. The main machine adopts the closed belt conveying, strictly controlling the storage amount of the small hopper, so that the materials can be used at any time.       
4. Forced feeding device: due to the traditional feeding method, it is difficult to evenly add the material into the mold box, which affects the product quality. The cushion block machine produced by me adopts the mode of forced feeding. The multi row mixing fork is installed in the mold box, and the hopper is sent to the mixing fork above the mold box to work to force the feeding of the mold box.       
5. Unique vibration form: the flow and pressure of the hydraulic system are controlled by computer to complete the vertical synchronous vibration frequency conversion and braking; the surplus oil during pressurization is used to convert it into vibration force, so as to basically eliminate energy consumption.       
6. Reasonable vibration distribution: the mold box is locked on the vibration table through the demoulding oil cylinder, and the mold platform vibrates together; a special vibrator is installed on the pressure head to increase the effect of vibration speed. This form of vibration makes the concrete liquefy and exhaust rapidly, and makes the products reach high density and strength.       
7. Increase the effective working table: due to the design of a variety of new vibration technology, the effective vibration molding area is increased, which lays a solid foundation for the mass production of cushion block, and greatly improves the production efficiency.       
8. One machine with multi functions: various specifications of cushion block, stirrup, support, curb stone, river brick, slope protection brick, square brick, sidewalk brick, to meet the market demand and reduce the investment risk for users to the greatest extent.  
Technical requirements:
1、 The production site should be more than 300 square meters, the room can be in 100-200 square meters, and there should be three-phase power supply.
2、 First of all, some supporting plates should be prepared for the use of supporting bricks. The old formwork and bamboo plywood can be used for cutting. Specification: 680 × 535 × 10-30mm, quantity: 800-1200 pieces.
3、 The cement shall be 32.5 and 500 cement with good quality, and some fly ash, fine sand, fine stone and coarse sand within 0.5 can be prepared if conditions permit. Stone powder can also be used directly, which has both stone surface and less fine stone particles.
4、 Ingredients:
1. Cement + fine sand (fly ash) + medium sand + stone (1:1:1:1)
2. Cement + stone powder (1:5)

reminder:
The service system is divided into: pre-sale service, in sale service, after-sale service, etc.  
Since its establishment, we have always adhered to the tenets of quality, faith-based, service first, responsible for users and satisfying users. We hereby make the following commitments:
1、 No unqualified products can be produced, and reliable products can be provided with quality and quantity on schedule.  
2、 I earnestly implement the contract law of the people's Republic of China and fulfill all my responsibilities.  
3、 Before signing the contract, provide the product performance introduction, provide the best construction scheme and reasonable suggestions for users to meet the special quality requirements put forward by users.
4、 After sales service: the province and city will arrive at the scene within 24 hours after receiving the call, and the service will arrive at the scene within 48 hours across the provinces. If the service users are not satisfied, the service will not stop. If you find that the personnel assigned by us can not meet the service requirements, please dial the 24-hour service telephone.

Customer case

  •  Video of light and thin material crusher production line Video of light and thin material crusher production line

    On the roller crusher, the crushed material will fall between the two rollers through the feeding port, and the finished material will fall down naturally. In case of hard or unbreakable materials, the roller of the roller crusher can automatically retreat by the action of hydraulic cylinder or spring to increase the roller clearance,

    Click to see the details

  •  Production site of scrap steel crusher Production site of scrap steel crusher

    1. It is suitable for crushing operations in mines, brick houses, open-air environment and other industrial and mining conditions. 2. Adjustment of discharge particle size. A wedge or gasket adjusting device is installed between the two rollers, and the top of the wedge device is equipped with an adjusting bolt. When the adjusting bolt pulls the wedge upward

    Click to see the details

  •  Live video of sheet metal crusher Live video of sheet metal crusher

    The roller crusher can be used for crushing high and medium hardness ores, rocks and refractories in mineral processing, chemical industry, cement, refractories, abrasives, building materials and other industrial sectors. Double roll crusher, especially in refractory and mining industries

    Click to see the details

  •  Video of metal crushing machine Video of metal crushing machine

    1. The crushing ratio is large; 2. The product particle size is uniform; 3. The structure is simple and the maintenance is convenient; 4. There are two kinds of coarse and fine crushing; 5. The maximum compressive strength of the crushed material is 320MPa. 6. Medium size crushing of various ores and bulk materials. 7. It is widely used in mines

    Click to see the details

About us
Company profile
corporate culture
contact us
News Center
Company news
Industry trends
technical knowledge
Product exhibition hall
Metal crusher
Shredder
Baler
Success stories
Engineering cases
Service support
Sales network
Service system