吉林附近有没有服务

 

Service hotline:
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine
 
 

Latest cases

What is the function of double axis Shredder?

Features of double shaft shredder: compared with other crushers, the features of the shredder are low speed of cutter shaft, low noise and low energy consumption. The suitable materials of the double axis shredder are as follows: 1. Various hollow containers: plastic beverage cans, plastic barrels, iron drums, packing boxes, etc

Click to see the details

How to save production cost of shredder

High manganese steel lining plate is used for shredder equipment lining plate, which greatly improves wear resistance and service life is 6-8 months, which greatly saves production cost of users. After being processed and crushed by shredder, these scrap iron sheets can be sent to steelmaking plant for smelting again to make new steel

Click to see the details

Current location: home page  >  Shredder

New double layer universal four axis shredder

The new-type double-layer universal four-axis shredder is a new type of shredder with bold innovation and independent research and development. The new-type double-layer universal four-axis shredder is a new type of research and development based on the original two-axis shredder through bold innovation and innovation

Product ordering hotline: eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

          New double layer universal Four axis shredder It is a new type of shredder with bold innovation and independent research and development. The new double-layer universal four-axis shredder is a new type of shredder equipment developed by Penglong machinery after bold innovation and innovation on the basis of the original double axis shredder. The shredder adopts double working rooms, with higher breaking ratio and more uniform grain size adjustment, so as to achieve the granularity you need

Installation and debugging   (free)
        The main engine and motor are fixed on the same frame, mainly to strengthen its stability. During installation, the ground should be flat to ensure the corresponding linearity of the main wheel and motor wheel, and ensure that the transmission belt has appropriate tension travel. The installation of auxiliary equipment can be determined by the customer according to the site conditions and without any potential safety hazard and without affecting the normal operation.
The connection parts shall be filled with dense sealing gasket. The power circuit of the whole machine should be connected by professionals. Before starting the machine, the system should check whether the connection parts are loose, whether the bearings and other parts need lubrication are lubricated, and jog the machine to see whether the steering direction is consistent with the marked direction. After all the inspections are completed, the whole machine can be started slowly.   
one Before start-up, the installation of all parts of the machine should be strictly checked to see if it meets the requirements. Metal objects should not fall into the machine. First, use the manual belt to test run to see whether there is biting brake and rotating shell collision, so as to avoid accidents.   
two Start up sequence: start the main power supply first, and jog the machine several times until it starts normally.   
three When feeding, it should be kept even, and it is forbidden for metal block to enter into the blanking hole.   
four In the process of use, the motor load can not be overloaded and keep normal operation.
five Before the normal operation of the equipment, the equipment shall be operated without load for a period of time, and all components shall be inspected in detail. If there is any abnormality, it shall be repaired in time and unloaded again until the no-load operation is normal.
six The wear procedure of the blade and grinding plate should be checked frequently. If the wear of the blade grinding plate is found to be serious, it should be replaced in time.   
seven When shutting down, the main engine shall be shut down first, and then the main power supply shall be cut off. When the equipment is not in use, all parts of the equipment should be cleaned, and the bearing lubricating oil should be cleaned and replaced. The equipment should be covered with dust to avoid rain and sun exposure.

Customer case

  •  Video of light and thin material crusher production line Video of light and thin material crusher production line

    On the roller crusher, the crushed material will fall between the two rollers through the feeding port, and the finished material will fall down naturally. In case of hard or unbreakable materials, the roller of the roller crusher can automatically retreat by the action of hydraulic cylinder or spring to increase the roller clearance,

    Click to see the details

  •  Production site of scrap steel crusher Production site of scrap steel crusher

    1. It is suitable for crushing operations in mines, brick houses, open-air environment and other industrial and mining conditions. 2. Adjustment of discharge particle size. A wedge or gasket adjusting device is installed between the two rollers, and the top of the wedge device is equipped with an adjusting bolt. When the adjusting bolt pulls the wedge upward

    Click to see the details

  •  Live video of sheet metal crusher Live video of sheet metal crusher

    The roller crusher can be used for crushing high and medium hardness ores, rocks and refractories in mineral processing, chemical industry, cement, refractories, abrasives, building materials and other industrial sectors. Double roll crusher, especially in refractory and mining industries

    Click to see the details

  •  Video of metal crushing machine Video of metal crushing machine

    1. The crushing ratio is large; 2. The product particle size is uniform; 3. The structure is simple and the maintenance is convenient; 4. There are two kinds of coarse and fine crushing; 5. The maximum compressive strength of the crushed material is 320MPa. 6. Medium size crushing of various ores and bulk materials. 7. It is widely used in mines

    Click to see the details

About us
Company profile
corporate culture
contact us
News Center
Company news
Industry trends
technical knowledge
Product exhibition hall
Metal crusher
Shredder
Baler
Success stories
Engineering cases
Service support
Sales network
Service system